Hermle 351-030A with no chimes

Posted: Sun Sep 21, 2008 12:11 pm     Post subject: Hermle 351-030A with no chimes

I recently purchased a schoolhouse clock with a Hermle 351-030A movement from an antique show. The clock runs perfectly but It doesn't chime. All the springs seem to be wound & the lever that locks the hammers is released. This is my first experience with a mechanical movement so please bear with me. Thanks.

Posted: Wed Sep 24, 2008 7:39 pm     Post subject:

a photo of the movement would help.

Posted: Sun Sep 28, 2008 4:31 am     Post subject:

I'll post a photo as soon as I can take one. Thanks.

Posted: Mon Sep 29, 2008 7:09 am     Post subject:

While disassembling the clock to take a photo of the movement, I used some canned air to clean the dust out of the mechanism. This got things spinning & the chimes worked briefly. So I think the problem is simply the need for a good cleaning & oiling. Can anyone recommend where I can get cleaning instructions & supplies? Thanks!

Posted: Mon Sep 29, 2008 3:36 pm     Post subject:

You may wish to purchase a book entitled "Clock Repair Basics" from the following site:

www.clockmakersnewsletter.com

This book will cover aspects of general maintenance (as well as general repair suggestions if the need should be).

You are also welcome to contact Klockit and speak with a mechanical technician for advise/suggestions.