Forum: General   Posted: Thu Jul 22, 2010 1:15 am   Subject: JAUCH 77 CHIMING PROBLEM

Thanks. The clock works perfectly. I guess I will take it out of the case and redo it all again.

Forum: General   Posted: Wed Jul 21, 2010 2:15 am   Subject: JAUCH 77 CHIMING PROBLEM

I have restored a Jauch 77 in a Emperor grandmother clock. It is been reinstalled in the clock and working well except---at 1:07 the clock chimes 11 times. The chime sequence is right for both the Wes ...

Forum: General   Posted: Thu May 29, 2008 2:40 am   Subject: Changing chime rods

Thanks. I had two other chime assemblies that the bars could be screwed out. I checked with my supplier after your message and found that they do indeed press them in now. They had sent me the wrong c ...

Forum: General   Posted: Sat May 24, 2008 3:17 am   Subject: Changing chime rods

I am installing a Hermle chime assembly in a clock with a front/ side mount. The chime rods are in reverse order. How do I take the rods out and put them in the right order? The assemblies that I have ...

Forum: Mechanical Movements   Posted: Wed Apr 16, 2008 3:01 am   Subject: Size wire for chiming lever spring

I am working on a Hermle 341-020 45CM movement. The spring on the chiming lever is missing and I want to make a new one but I don't know what size wire and where to obtain wire to make it. The Hermle ...

Forum: Mechanical Movements   Posted: Wed Apr 16, 2008 3:00 am   Subject: Size wire for chiming lever spring

I am working on a Hermle 341-020 45CM movement. The spring on the chiming lever is missing and I want to make a new one but I don't know what size wire and where to obtain wire to make it. The Hermle ...

Forum: General   Posted: Mon Mar 31, 2008 2:52 am   Subject: Glass for a bezel

Thanks! I will measure carefully. I would not have known that.

Forum: General   Posted: Sat Mar 29, 2008 6:35 pm   Subject: Glass for a bezel

I was surprised also that Timesavers couldn't help me. I have been told many times how helpful they are. The bezel and pan combination does not come with glass. The Howard Miller schoolhouse clock tha ...

Forum: General   Posted: Sat Mar 29, 2008 4:03 am   Subject: Glass for a bezel

I am finishing a clock project. I acquired a schoolhouse clock case and installing a hermle 341-020 45cm in it. The problem is the clockcase was made so that I will have to use a pan and bezel combin ...

Forum: Mechanical Movements   Posted: Thu Mar 13, 2008 3:39 am   Subject: Success

Thanks. I took the bracket plate off and slightly readjusted it when I returned it. The pendulum swings correctly now and it is keeping excellent time. Now I am working on the chiming timing. This is ...

Forum: Mechanical Movements   Posted: Mon Mar 10, 2008 3:14 am   Subject: Continuing work on the Hermle 341-020

I have unable to work on the movement until this weekend. I have done as you suggested but found no extreme play. I took the movement down again, cleaned the movement with a solution from Timesavers, ...

Forum: Mechanical Movements   Posted: Mon Feb 11, 2008 1:34 am   Subject: Hermle 341-020 stopping

There is an 84 on the back of the movement. I assume it means produced in 1984. Is that right? When I disassembled the movement, I checked for worn pivot holes. They all seemed okay. The barrel holes ...

Forum: Mechanical Movements   Posted: Tue Feb 05, 2008 10:20 pm   Subject: Hermle 341-020 stopping

I am new to the forum and am beginning clock repair. I have a Hermle 341-020, 45cm that I have cleaned and oiled. I followed the instructions from a DVD about these movements. I have adjusted the beat ...