Setting the time

Posted: Sun Nov 27, 2011 6:56 am     Post subject: Setting the time

I built a Dearborn Regulator Wall Clock from a Klockit kit several years ago. However, the C-battery clock movement has a small plastic dial in the back -- one that does not extend over the edge of the case. If you have to reset the time, for Daylight Saving, for example, it is almost impossible to turn the dial because of its small size, and the fact that it is more-or-less embedded in the movement case. Unless your fingertips have claws shaped like talons, it is extremely difficult to turn the dial, and even more difficult to set the time exactly to the minute desired. Is there a tool available that would make this procedure easier? Any suggestions would be appreciated. ''