Urgos UW22012?

Posted: Wed Sep 14, 2011 5:18 pm     Post subject: Urgos UW22012?

Dear all,
I have a question about a small regulator-a-like wall clock, with a movement stamped as "UW22012 Urgos Made in Germany No (0) Jewels Unadjusted". It is much smaller than a typical 21-23 inches long regulator-style wall clocks. It has total dimensions of 11x8. It appears to have a bent main shaft and also the thread on the shaft pin is damaged so I cannot secure the handles (the movements, handles, pendulum and some small retainers are there, but I have to put it all together). My questions: why can't I find any internet source that may be selling a replacement movement (or have ANY information regarding this model) and what are my chances to find an after market movement that would fit the face/mounting plate of the clock? I'd really like this little clock to be on my wall.
Thank you all in advance,
Val

Posted: Thu Sep 15, 2011 12:06 am     Post subject:

Unfortunately the original Urgos clock company sold out to a couple different companies over the past years. This is an older movement which they do not make anymore. Your best bet is to find a used movement, and take parts from it to repair yours. You could try contacting the company below to see if they can help.

http://www.clockworks.com/urgos.html

PMclocks.com says they can supply parts for Urgos clocks, so you may want to check with them.

Posted: Thu Sep 15, 2011 1:40 pm     Post subject:

Thank you!